Part wanted - lower B model engine mount snubber.

[len]

I only need the rubber insert made by LORD. The part number is
J4056-4 . That may be the p/n for the whole assembly though. The rubber snubber is riveted in and if what you have is already together I could just buy the whole assembly. Thanks, len
p.s. I have alot of other Hiller B/C parts for sale. I do not have a list
together so if you need something, be specific and I'll look through my inventory.

[gypsyrotor]

Pat pocrus at fort wolters and vic simon at aero falcon both have new snubbers.

[len]

I tried them both already. Fort Wolters said they had to throw all of theirs out because the rubber separated from the metal portion (victim of time)
and aero falcon did not have any. Thanks for the reply though

[gypsyrotor]

I know for a fact that vic simon has snubbers,I saw them myself in person 2 weeks ago.when you call ask for Donny.And you might also try copter care.that is Kenny Bartholemew.He will know where to get them,Hiller is hard to deal with and their prices are high,but they will probably have them.

[Heli Parts]

I think I found the mount, I am not sure if it is the whole mount or just the rubber insert, Let me know if you are still looking for it.

[Steve]

I also find myself looking for a pair of the lower snubber rubber mounts. I have a UH12C model. I called Hiller, and discovered that they are not willing or able to source them. They directed me to Lord corp. The couple of Lord distributors that I called, can't even locate the J4056-4 part number.

Would anyone know of a source, or be a source, for these Lord vibration isolators. I'd also be interested in the complete snubber assembly if that's the only way they could come....

Thanks

Steve

[Steve]

Well I bought a nos pair from Donny at Arrow Falcon. We discussed the cure date of the rubber, which appeared to be 1957, but I don't see much of an alternative at this point, so I said send me the best 2 of the 3 that he had and I'll see how they go.

Steve